GLOSSARY ENTRY (DERIVED FROM QUESTION BELOW) | ||||||
---|---|---|---|---|---|---|
|
08:04 Jul 7, 2012 |
|
Danish to English translations [PRO] Tech/Engineering - Electronics / Elect Eng / regulations | |||||||
---|---|---|---|---|---|---|---|
|
|
Summary of answers provided | ||||
---|---|---|---|---|
3 | earth leakage circuit breaker |
|
Summary of reference entries provided | |||
---|---|---|---|
Voltage- vs. current-operated circuit breakers (interrupters) |
|
earth leakage circuit breaker Explanation: ELCB cf. Gyldendal Special Bygge-Anlæg http://ordbog.gyldendal.dk/sitecore/content/Ordbog/Home/Opsl... |
| |
Login to enter a peer comment (or grade) | ||
The asker has declined this answer |
2 hrs |
Reference: Voltage- vs. current-operated circuit breakers (interrupters) Reference information: There's a distinction to keep in mind here between devices that react to the voltage and those that react to the current in the circuit. Your term refers to the voltage-operated type. This short Danish explanation is at the first reference link below: "Før fejlstrømsafbryderen eksisterede der i mange år en fejlspændingsafbryder som kun blev anvendt på udvalgte steder. Fejlspændingsafbrydere betegnes også FU-afbrydere ("F" for Fejl, og "U" er det internationale bogstavsymbol for elektrisk spænding). I dag anvendes fejlspændingsafbrydere kun i særlige tilfælde hvor fejlstrømsafbrydere er uegnede." This whole matter is discussed in English at the second reference link. Here's an excerpt: "For many years, the voltage operated ELCB and the current operated ELCB were both referred to as ELCBs because it was a simple name to remember and they both seemed to do the same job, although in different ways. However, the use of a common name for two different devices gave rise to considerable confusion in the electrical industry. If the wrong type was used on an installation, the level of protection given could be substantially less than that intended. To remove this confusion, IEC decided to apply the term Residual Current Device (RCD) to differential current operated ELCBs. "The RCD is now the preferred means of providing shock protection, and this term is most widely used internationally. Unfortunately, the RCD industry has had considerable difficulty in shaking off the old association with ELCBs, and many electrical contractors still ask for an ELCB when in fact they want an RCD. Hopefully this article will remove some of the confusion." I would probably use "(voltage-operated) earth leakage circuit breaker" and then V-ELCB (or vELCB, as at the English link), to be safe. In the U.S. it would be "(voltage-operated) ground fault circuit interrupter" (or "breaker', in lieu of "interrupter"). Reference: http://da.wikipedia.org/wiki/Fejlstrømsafbryder Reference: http://www.westernautomation.com/RCDsTheNames.htm |
| |
Login to enter a peer comment (or grade) |
Login or register (free and only takes a few minutes) to participate in this question.
You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.