doorstempellijst

16:07 Sep 30, 2014 

Between the two of you, you provided me with the answer I needed. Freek gave a citation in Dutch ("...lassers-kwalificatie certificaat en daaraan gekoppeld de juiste verlenging door de keuringsinstantie (doorstempellijst)".) and Michael gave equivalent citations in English, particularly "3. Then their present company attaches a company headed blank sheet to his quals stating: Welder Qualification Certificate-Extension of Validity
4. Welding inspector and certifying body stamp for extension"
I made it clear in the original context that this was about job vacancies for welders, so any reference to punch lists (which relate to the completion of projects) is invalid for the context. I am happy that I found the right solution and so is my client. So, again, thanks to both of you for your help.

15:29 Sep 30, 2014 

De term "doorstempellijst" is only known within the branche and I wouldn't know an equivalent in English used by the British welding world... Therefore I'd leave this term untranslated and give an explanation between ()

14:47 Sep 30, 2014 

I merely remarked that it sounds a lot like ‘punch list’. I gave you my suggested translation in my last discussion entry: ‘Welders Approval Certificate extension’.

As I now see it, in this context, a ‘doorstempellijst’ is both a punch list and a Welders Approval Certificate extension ... or as you said, ‘a list of extensions of the validity of a welder's qualification.’

14:12 Sep 30, 2014 

I decided to close without grading as nobody (formally) put forward an acceptable answer. A pity, because Freek was on the nail with his discussion entry. The reference he provides makes it clear that a 'doorstempellijst' is a list of extensions of the validity of a welder's qualification. Michael, you gave a lot of useful references in English but eventually went off on the 'punch list' tack, which is simply wrong. I did give you both the opportunity to formalise your answers, but you did not do so. Nevertheless, I am grateful for your help and I used Freek's answer in the translation. Aysen, I am sorry but 'punch list' is clearly not the correct answer.

17:29 Sep 29, 2014 

I'm loath to enter an answer as I am still not 100% sure about the meaning of the term ‘doorstempellijst’. I think I would translate:

‘de benodigde certificaten en doorstempellijsten’

as

‘the required Welders Approval Certificates and Certificate extensions’ or
‘the required Welders Approval Certificates and Welders Approval Certificate extensions’

(see: http://www.caa.co.uk/default.aspx?catid=1461&pageid=13270 )

I suppose the term ‘doorstempellijst’ on its own would therefore be: ‘Welders Approval Certificate extension’.

17:08 Sep 29, 2014 

Thanks for all the discussion entries, Freek and Michael. I have a clearer idea now. Would either of you like to post a formal answer so that I can allocate points?

19:16 Sep 28, 2014 

‘doorstempellijst’ does sound a lot like a ‘punch list’

http://en.wikipedia.org/wiki/Punch_list
http://www.wisegeek.org/what-is-a-punch-list.htm

18:57 Sep 28, 2014 

‘5.2 Extension of approval
5.2.1 The validity of the approval on the certificate may be prolonged for further periods
within the original range of approval, provided each of the following conditions in accordance
with 5.1.1 are fulfilled and:

[…]

5.2.2 The Society should verify compliance with the above conditions and sign the
extension of the welder’s approval certificate.’ (https://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&source=web... )

‘Most certifications expire after a certain time limit, and have different requirements for renewal or extension of the certification.’ (http://en.wikipedia.org/wiki/Welder_certification )

18:57 Sep 28, 2014 

n.a.v jouw ref (‘De aangevraagde lasser moet uiteraard in het bezit zijn van het juiste lassers-kwalificatie certificaat en daaraan gekoppeld de juiste verlenging door de keuringsinstantie (doorstempellijst)’:

‘Noticed quite frequently that Qualifications have been submitted in documentation packs with:

1. welder producing quals from pevious companies (company headed quals)
2. completing production butt
3. Then their present company attaches a company headed blank sheet to his quals stating: Welder Qualification Certificate-Extension of Validity
4. Welding inspector and certifying body stamp for extension
5. then every 6 months /2 years etc

So if this happening technically this not correct just for ASME 1X or is this industry standard for all specs i.e AWS D1.1 etc’ (http://www.ukwelder.com/forum/lofiversion/index.php/t12936.h... )

18:49 Sep 28, 2014 

…just thinking out loud

‘A list of welders and copies of qualification certificates. (certification in accordance with either
EN 287-1+AC or EN287 + PED 97/23 EC). A list of welding equipment by indicating their
technical specifications (welding machine, brim preparation equipment, thermal treatment,
preheating, measuring tools, welding stencils, contact thermometers, dynamometric wrenches,
etc.). The list shall indicate only the electrical equipment, gas pressure gauges and hoses,
dynamometric wrenches with valid inspection (testing) documents or labels.’ (http://www.orlenlietuva.lt/EN/ForBusiness/DocumentsForContra... )

18:43 Sep 28, 2014 

‘Scary thing is he is CSWIP 3.1, TWI Registered Inspector, International Welding Inspector and European Welding Inspector. (at least that is what his stamps say)’ (http://www.ukwelder.com/forum/lofiversion/index.php/t10964.h... )
-----------------------------------------------------------------------------------------*
‘Before starting test
a) Checking of the welder's identity (e.g. driving licence)
b) Checking of the WPS and handling it over to the welder
c) Checking of the test piece
- Parent material (identification)
- Dimensions (thickness, length and diameter)
- Joint preparation (acc. to WPS)
- Stamping (welder's and examiner's stamps)
d) Checking the tack welds in the test piece
e) Identification of the welding consumables (acc. to WPS)’

(http://www.iiwelding.org/WorkingUnits/QCMB_IAB/QCMB_IAB_Grou... )

18:41 Sep 28, 2014 

‘• Certified welders (stamped) in accordance with EN 287-1:2011;’

(http://www.betak.ro/en/betak-welded-metal-structures.html )

-----------------------------------------------------------------------------------------*

‘Renewal of Qualification
ASME You need to weld according to the code within 6 months.
According to the code the cert not transferable to another employer unless he was present at original test.
EN 287 Valid for 2years, providing that the welders supervisor can confirm that every six month period the welder has been working within his range of qualification.
After 2 years it may be prolonged for periods of 2 years by examining body , on the basis of satisfactory evidence from volumetric testing on at least two items of work.
Qualification can be transferred provided it is stamped accordingly.’ (http://www.mig-welding.co.uk/forum/threads/welding-codes-que... )

18:36 Sep 28, 2014 

‘R Stamp Welding

Boiler repair in the United States is governed by the National Board of Boiler and Pressure Vessel Inspectors and the ASME under a classification called R Stamp Welding. In order to perform R Stamp welds and repairs, boilermakers are tested and certified in the quality of their weld joints through a rigorous testing procedure. R stamps are issued to companies that have existing ASME code stamps issued for construction and whose QC system covers repairs or follow the guidelines set up by ASME to obtain an R stamp. Welders identify their welds by stamping their identifying welder number adjacent to their completed weld with a <font size="2" color="blue"><font size="2" color="blue">set of steel stencils</font></font>.[3]’

(http://en.wikipedia.org/wiki/Boilermaker )

18:22 Sep 28, 2014 

De aangevraagde lasser moet uiteraard in het bezit zijn van het juiste lassers-kwalificatie certificaat en daaraan gekoppeld de juiste verlenging door de keuringsinstantie (doorstempellijst).

http://www.deberk.org/vacatures.php?item=42