10:55 Jul 24, 2018 |
|
Russian to English translations [PRO] Tech/Engineering - Metrology | |||||||
---|---|---|---|---|---|---|---|
|
|
Summary of answers provided | ||||
---|---|---|---|---|
4 | See |
| ||
3 | see |
| ||
3 | the next calibration should be done after the expiration of at least half of |
|
Discussion entries: 6 | |
---|---|
see Explanation: the next verification period should be at least half of the calibration interval from the moment of placing the facility into operation service https://www.nist.gov/sites/default/files/documents/2017/04/2... https://www.nist.gov/calibrations/recommended-calibration-in... |
| |
Login to enter a peer comment (or grade) |
the next calibration should be done after the expiration of at least half of Explanation: ... the next calibration should be done after the expiration of at least half of the mid-calibration period from the date when the Facility became operational. |
| |
Login to enter a peer comment (or grade) |
See Explanation: after the first/initial recalibration from the facility commissioning date, the next period to recalibration should be at least half the length. first/initial recalibration - первая поверка СИ от момента ввода Объекта в эксплуатацию -------------------------------------------------- Note added at 1 day 21 hrs (2018-07-26 08:13:04 GMT) -------------------------------------------------- Viktoria, Прошу прощения за то, что сбил с толку своим предыдущим ответом. Я переговорил со знакомым метрологом. Вы правы. Очередная поверка должна состояться тогда, когда на момент ввода объекта в экусплуатацию прибор хранился/бездействовал больше половины межповерочного интервала, т.е. если дата ввода в эксплутацию пришлась на вторую половину паспортного МПИ прибора. Т.о. если, например, МПИ по паспорту = 4 года, паспорт выдан в 2012 г., а объект вводят в эксплуатацию в 2015 г., то прибор сразу поверяют. Вот выдержка из Технические требования на проектирование, изготовление, поставку, шефмонтаж, пуско-наладку и сдачу в промышленную эксплуатацию «Роснефть». 1750712/0002Д003-ПП-016.002.000-ТК-ТТ-02. Вот ссылка: zakupki.rosneft.ru/files/.../1750712_0002d003-pp-016_002_000-tk-tt-02-rc04.doc Пункт 8.8.1 Требования к метрологическому обеспечению: «... причем на момент проведения пуско-наладочных работ оставшийся срок действия поверки должен быть не менее чем половина межповерочного интервала». Тогда исправленный перевод: An instrument has to be recalibrated if by the time the facility is put on line the instrument has been idle/off-line for longer than a half of its initial calibration interval / calibration interval recommended by the manufacturer. Или: An instrument has to be recalibrated if the facility is commissioned in the second half of the initial calibration interval / calibration interval recommended by the manufacturer. Example sentence(s):
https://books.google.ru/books?id=D4-5DAAAQBAJ&pg=PA92&lpg=PA92&dq=initial+calibration+interval+recalibrated+half&source=bl&ots=SIYjaXD0bI&si |
| |
Login to enter a peer comment (or grade) |
Login or register (free and only takes a few minutes) to participate in this question.
You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.