Mar 10, 2010 16:44
14 yrs ago
English term
line-side-tap
English to Italian
Tech/Engineering
Electronics / Elect Eng
pannelli solari
Mounting Current Transformers
Refer to the following guidelines for mounting CTs:
• Open the CT by pulling the removable section and placing the section around the main conductor that enters the service panel from the meter or utility (Fig. 64).
Note. Fig. 64 shows CT mounting in a split-phase two-line AC configuration.
• Ensure that the side of the CT that has the label THIS SIDE TOWARD SOURCE faces toward the utility and away from the distribution center.
• If the PV circuit from the inverter has been installed with a ***line-side-tap*** configuration, ensure that the CTs are mounted on the utility side of the tap.
TIA!
Refer to the following guidelines for mounting CTs:
• Open the CT by pulling the removable section and placing the section around the main conductor that enters the service panel from the meter or utility (Fig. 64).
Note. Fig. 64 shows CT mounting in a split-phase two-line AC configuration.
• Ensure that the side of the CT that has the label THIS SIDE TOWARD SOURCE faces toward the utility and away from the distribution center.
• If the PV circuit from the inverter has been installed with a ***line-side-tap*** configuration, ensure that the CTs are mounted on the utility side of the tap.
TIA!
Proposed translations
(Italian)
4 | uscita sul lato linea (di ingresso) | Vittorio Preite |
Proposed translations
1 hr
Selected
uscita sul lato linea (di ingresso)
per UTILITY si intende la rete elettrica di ingresso
un TAP e' una presa (accesso) intermedia del trasformatore oppure un una connessione di comodo o ausiliario, sempre sul trasformatore. Ciao
un TAP e' una presa (accesso) intermedia del trasformatore oppure un una connessione di comodo o ausiliario, sempre sul trasformatore. Ciao
3 KudoZ points awarded for this answer.
Comment: "Grazie Vittorio!"
Something went wrong...