Feb 20, 2013 10:40
11 yrs ago
English term
possible to blocking (illegible)
English
Science
Materials (Plastics, Ceramics, etc.)
SDS
Hello,
I just received an SDS to translate, this doc file was converted from a pdf (original pdf is not available).
There are 2 illegible parts and I would like to ask for your help to figure out the original meaning lost in the
conversion process.
Those familiar with safety data sheets may figure it out instinctively:
Section 10. Stability and Reactivity:
A. Chemical Stability
- Stable under normal condition
- Avoid heat "or It is possible to blocking".
B. Possibility of Hazard Reactions
Thanks!
U
I just received an SDS to translate, this doc file was converted from a pdf (original pdf is not available).
There are 2 illegible parts and I would like to ask for your help to figure out the original meaning lost in the
conversion process.
Those familiar with safety data sheets may figure it out instinctively:
Section 10. Stability and Reactivity:
A. Chemical Stability
- Stable under normal condition
- Avoid heat "or It is possible to blocking".
B. Possibility of Hazard Reactions
Thanks!
U
Responses
3 | decompose or break down | Ildiko Santana |
2 | or freezing | Terry Richards |
Responses
3 hrs
Selected
decompose or break down
Véleményem szerint amit látni vélsz sem szakmai, sem nyelvtani szempontból nem állná meg a helyét. A hő hatására leggyakrabban ez a két jelenség léphet fel: decompose vagy break down (lebomlás).
Az alábbiak talán segítenek, amíg meg nem kapod a pdf-et az ügyféltől. Mindenképp ragaszkodj ehhez, nagyon nem szaba találgatni!
The MSDS A Basic Guide For Users - International Version
10. Stability And Reactivity
SECTION 10 STABILITY AND REACTIVITY
a. Chemical stability:
b. Conditions to avoid:
c. Incompatibility with other materials:
d. Hazardous decomposition products:
e. Hazardous polymerization:
This section of the MSDS indicates how stable the material is and describes any conditions under which it is unstable or can react dangerously. Unstable materials may break down (decompose) and cause fires or explosions or cause the formation of new chemicals which have different hazards. For example, these new chemicals (decomposition products) may be more toxic or flammable than the original material. Conditions such as heat, sunlight, and aging of the chemical can cause unstable chemicals to break down. Therefore, these materials require special storage and handling precautions.
Some chemicals can create a hazard because they have a tendency to undergo a particular type of chemical reaction called "polymerization". This reaction may generate a lot of heat, may generate enough pressure to burst a container or may be explosive. Chemicals which tend to react in this way often contain additives called inhibitors which reduce or eliminate the possibility of an uncontrolled polymerization.
Some materials may create a hazard if they come in contact with water (water-reactive chemicals). Others may be pyrophoric, meaning they can ignite spontaneously when exposed to air.
Incompatible materials are materials which may react violently or explosively if they are mixed or brought together. These materials should be stored separately and should not be mixed unless special procedures are followed.
You need to be aware of the information in this section so you can store and handle the material safely and avoid mixing incompatible materials.
http://ccinfoweb.ccohs.ca/help/msds/msdsINTGUIDE.html
- innen jutunk el ehhez:
MSDS - An Explanation of Common Terms
...Many chemicals will decompose (break down) when heated. The autoignition temperature is the temperature at which the chemicals formed by decomposition begin to burn...
http://ccinfoweb.ccohs.ca/help/msds/msdstermse.html
+ egy:
SAFETY DATA SHEET
Section 10: Stability and reactivity
10.1. Reactivity
Reactivity: Stable under recommended transport or storage conditions.
10.2. Chemical stability
Chemical stability: Stable under normal conditions.
10.3. Possibility of hazardous reactions
Hazardous reactions: Hazardous reactions will not occur under normal transport or storage conditions.
Decomposition may occur on exposure to conditions or materials listed below
http://www.synopticshealth.com/assets/doc/ProReveal-SDS.pdf
--------------------------------------------------
Note added at 3 hrs (2013-02-20 14:26:05 GMT)
--------------------------------------------------
- - bocs, nem szabaD - -
Az alábbiak talán segítenek, amíg meg nem kapod a pdf-et az ügyféltől. Mindenképp ragaszkodj ehhez, nagyon nem szaba találgatni!
The MSDS A Basic Guide For Users - International Version
10. Stability And Reactivity
SECTION 10 STABILITY AND REACTIVITY
a. Chemical stability:
b. Conditions to avoid:
c. Incompatibility with other materials:
d. Hazardous decomposition products:
e. Hazardous polymerization:
This section of the MSDS indicates how stable the material is and describes any conditions under which it is unstable or can react dangerously. Unstable materials may break down (decompose) and cause fires or explosions or cause the formation of new chemicals which have different hazards. For example, these new chemicals (decomposition products) may be more toxic or flammable than the original material. Conditions such as heat, sunlight, and aging of the chemical can cause unstable chemicals to break down. Therefore, these materials require special storage and handling precautions.
Some chemicals can create a hazard because they have a tendency to undergo a particular type of chemical reaction called "polymerization". This reaction may generate a lot of heat, may generate enough pressure to burst a container or may be explosive. Chemicals which tend to react in this way often contain additives called inhibitors which reduce or eliminate the possibility of an uncontrolled polymerization.
Some materials may create a hazard if they come in contact with water (water-reactive chemicals). Others may be pyrophoric, meaning they can ignite spontaneously when exposed to air.
Incompatible materials are materials which may react violently or explosively if they are mixed or brought together. These materials should be stored separately and should not be mixed unless special procedures are followed.
You need to be aware of the information in this section so you can store and handle the material safely and avoid mixing incompatible materials.
http://ccinfoweb.ccohs.ca/help/msds/msdsINTGUIDE.html
- innen jutunk el ehhez:
MSDS - An Explanation of Common Terms
...Many chemicals will decompose (break down) when heated. The autoignition temperature is the temperature at which the chemicals formed by decomposition begin to burn...
http://ccinfoweb.ccohs.ca/help/msds/msdstermse.html
+ egy:
SAFETY DATA SHEET
Section 10: Stability and reactivity
10.1. Reactivity
Reactivity: Stable under recommended transport or storage conditions.
10.2. Chemical stability
Chemical stability: Stable under normal conditions.
10.3. Possibility of hazardous reactions
Hazardous reactions: Hazardous reactions will not occur under normal transport or storage conditions.
Decomposition may occur on exposure to conditions or materials listed below
http://www.synopticshealth.com/assets/doc/ProReveal-SDS.pdf
--------------------------------------------------
Note added at 3 hrs (2013-02-20 14:26:05 GMT)
--------------------------------------------------
- - bocs, nem szabaD - -
2 KudoZ points awarded for this answer.
1 hr
or freezing
Note the confidence level but it makes sense in the context.
Discussion
Although no correct answer (which I admit was close to impossible to accomplish), but 2 points for the more elaborated attempt.
Thanks.