cable bushings interface > sučelje za kabelske vodove/uvode, sučelje kabelskih vodova/uvoda

Carefully fit the cable bushing(s) as required with M20 or M25 cable entries (2 x M20 and 1 x M25 included in the delivery) by inserting them into the corresponding cable entry/ entries

Pažljivo ugradite ležišta kabela kao što je potrebno s M20 ili M25 kabelskim uvodima
(2 x M20 i 1 x M25 su uključeni u opseg isporuke) umetanjem u odgovarajuće kabelske ulaze.
http://resource.boschsecurity.com/documents/Installation_Man...

CONTROL BOX
- cable bushing large
- cable bushing small

MONTAŽA UPRAVLJAČKE KUTIJE
kabelski vod velikog kapaciteta
kabelski vod malog kapaciteta
http://manuals.easygates.co.uk/PDF/misc/cb124.pdf

PREPARATION
Open the 4 pre-cut holes at the bottom of the casing with a screwdriver or a similar device. Attach large cable bushing on the left then the rest as shown in picture. Humidity and water destroy the control. All openings and cable bushings must be sealed against water (waterproof). The control box with the motor control is to be mounted with the cable bushings facing down.

PRIPREMA UPRAVLJAČKE KUTIJE
Otvorite 4 otvora na postolju kućišta pomoću odvijača ili sličnog alata. Veliki kabelski vod pričvrstite lijevo, ostalo kako je prikazano.
Vlaga i voda razaraju upravljač. Svi otvori i kabelski vodovi moraju se obavezno hermetički zatvoriti. Upravljačka kutija s motornim upravljanjem montira se s kabelskim vodovima s donje strane.
http://manuals.easygates.co.uk/PDF/misc/cb124.pdf