Glossary entry (derived from question below)
Russian term or phrase:
Химический отвод ускорителя.
English translation:
Chemical withdrawal of the accelerator
Added to glossary by
Sofi_S
Jan 6, 2018 19:36
6 yrs ago
1 viewer *
Russian term
Химический отвод ускорителя.
Russian to English
Science
Physics
Nuclear physics
В рамках сотрудничества между X и Y на установке Z существующего ускорителя была проведена первая серия совместных экспериментов по изучению W на химическом отводе ускорителя.
Спасибо.
Спасибо.
Proposed translations
(English)
3 | Chemical withdrawal of the accelerator | Vladyslav Golovaty |
3 | beamline/extractor of the ion-beam accelerator | Frank Szmulowicz, Ph. D. |
Proposed translations
25 mins
Selected
Chemical withdrawal of the accelerator
https://books.google.com.ua/books?id=iH-ty5d92ZQC&pg=PA604&l...
--------------------------------------------------
Note added at 4 days (2018-01-10 20:44:26 GMT) Post-grading
--------------------------------------------------
Thank you very much!
--------------------------------------------------
Note added at 4 days (2018-01-10 20:44:26 GMT) Post-grading
--------------------------------------------------
Thank you very much!
4 KudoZ points awarded for this answer.
Comment: "Thanks"
19 hrs
beamline/extractor of the ion-beam accelerator
Transactinides are produced by bombarding actinide targets with ions of lighter elements. Химический must refer to the ionic species of the lighter elements and отвод to the beamline or extractor of the accelerator.
ccccccccccccccccccccccccccc
Production of Transactinide Elements
Longer-lived transactinide nuclides required in chemical
experiments exit in the neutron-rich region of the chart of
nuclides and they are produced in so-called hot fusion reactions
of such beams as 18O, 19F, 22Ne, and 26Mg with actinides
targets of 244Pu, 248Cm, 249Bk, and so on. The produced transactinide
nuclides must be identified by measurement of their
decay or by that of their known daughter nuclei with unambiguous
detection techniques
A 248Cm target of 610 µg/cm2 thickness prepared by electrodeposition of Cm(NO3)3 from isopropyl alcohol onto 2.4 mg/cm2 thick beryllium backing foil is bombarded by 18O beams delivered from the JAERI tandem accelerator.
http://www.radiochem.org/paper/JN63/jn6315.pdf
ccccccc
Suppressors & Extractors. Maintaining stable suppressor and extractor voltage is important for overall focused ion beam performance
http://www.oregon-physics.com/supressors-extractors.php
ccccccccccccccc
ccccccccccccccccccccccccccc
Production of Transactinide Elements
Longer-lived transactinide nuclides required in chemical
experiments exit in the neutron-rich region of the chart of
nuclides and they are produced in so-called hot fusion reactions
of such beams as 18O, 19F, 22Ne, and 26Mg with actinides
targets of 244Pu, 248Cm, 249Bk, and so on. The produced transactinide
nuclides must be identified by measurement of their
decay or by that of their known daughter nuclei with unambiguous
detection techniques
A 248Cm target of 610 µg/cm2 thickness prepared by electrodeposition of Cm(NO3)3 from isopropyl alcohol onto 2.4 mg/cm2 thick beryllium backing foil is bombarded by 18O beams delivered from the JAERI tandem accelerator.
http://www.radiochem.org/paper/JN63/jn6315.pdf
ccccccc
Suppressors & Extractors. Maintaining stable suppressor and extractor voltage is important for overall focused ion beam performance
http://www.oregon-physics.com/supressors-extractors.php
ccccccccccccccc
Discussion