Glossary entry (derived from question below)
Polish term or phrase:
wywołanie cyklu na prostej
English translation:
calling a (machining) cycle along a straight line
Added to glossary by
Frank Szmulowicz, Ph. D.
Oct 1, 2019 20:33
4 yrs ago
Polish term
United States
The Slanguage Buff
Native in: Polish (Variant: Standard-Poland) 
, English (Variant: US)
Works in: Polish to English, Spanish to English, English, and 4 more.
wywołanie cyklu na prostej
Polish to English
Tech/Engineering
Materials (Plastics, Ceramics, etc.)
Programowanie zabiegów frezarskich z wykorzystaniem cykli obróbkowych: cykl wiercenia, cykl wiercenia z łamaniem wióra, cykl wiercenia z łamaniem i usuwaniem wióra, cykl rozwiercania, cykl gwintowania, cykl wytaczania, cykl frezowania kieszeni prostokątnej, cykl frezowania kieszeni okrągłej, cykl frezowania czopa, wywołanie cyklu w punkcie, wywołanie cyklu na prostej, wywołanie cyklu na okręgu.
Proposed translations
(English)
| 3 | calling a (machining) cycle along a straight line |
Frank Szmulowicz, Ph. D.
|
Change log
Oct 1, 2019 20:33: changed "Kudoz queue" from "In queue" to "Public"
Oct 2, 2019 19:08: Frank Szmulowicz, Ph. D. Created KOG entry
Proposed translations
5 hrs
Frank Szmulowicz, Ph. D.
United States
United States
Native in Polish
&
English
Specializes in field
United States
On time, on target, on budget.
Native in: English , Polish
Works in: Polish to English, English to Polish, Russian to Polish, and 1 more.
Related KudoZ points
:
143
Selected
calling a (machining) cycle along a straight line
Subprogram file
This is a file of subprograms.
When a machining cycle is to be carried out with the programs in this file, it is necessary to specify the subprogram name in selecting programs.
3) System subprogram file
Sub programs, when they are called and used, must always be specified by program selection. When using a subprogram in the system sub program, however, it is not necessary to to specify the subprogram by program selection
1-1. Calling a Subprogram
• A subprogram can be called not only from the main program but also from another subprogram, and up to 16-subprogram nesting is possible
G codes calling a fixed cycle
1-1. Calling a Subprogram
http://www2.i-logic.com/manuals/Okuma-OSP-P200M-ProgManual.p...
ccccccccccc
If you define M109 or M110 before calling a machining cycle with a number greater than 200, the adjusted feed rate is also effective for circular arcs within these
https://www.scribd.com/doc/246745678/User-s-Manual-HEIDENHAI...
ccccccccccccccccccccccccc
So you can make your own drill cycle in the control, by calling a drill cycle you
http://www.siemens.com.tr/i/Assets/cnc4you/docs/Indir_SINUME...
ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
This is a file of subprograms.
When a machining cycle is to be carried out with the programs in this file, it is necessary to specify the subprogram name in selecting programs.
3) System subprogram file
Sub programs, when they are called and used, must always be specified by program selection. When using a subprogram in the system sub program, however, it is not necessary to to specify the subprogram by program selection
1-1. Calling a Subprogram
• A subprogram can be called not only from the main program but also from another subprogram, and up to 16-subprogram nesting is possible
G codes calling a fixed cycle
1-1. Calling a Subprogram
http://www2.i-logic.com/manuals/Okuma-OSP-P200M-ProgManual.p...
ccccccccccc
If you define M109 or M110 before calling a machining cycle with a number greater than 200, the adjusted feed rate is also effective for circular arcs within these
https://www.scribd.com/doc/246745678/User-s-Manual-HEIDENHAI...
ccccccccccccccccccccccccc
So you can make your own drill cycle in the control, by calling a drill cycle you
http://www.siemens.com.tr/i/Assets/cnc4you/docs/Indir_SINUME...
ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
4 KudoZ points awarded for this answer.
Comment: "Thank you, Frank."
Something went wrong...