English to Czech Tech/Engineering Electronics / Elect Eng

součást autonomního podlahového mycího stroje

"If you measure voltage on BOTH sets of pins, turn off the machine, reconnect the up trunk connector on the BCM side, then turn on the machine and go to the Up Trunk-ModemSide Voltage Check section to perform voltage check on the M12 connector again."

"If the up trunk cable has no voltage measured in one of the three sets of pins or wiring is damaged (bent, missing pins), please perform the following steps: ... Place an order for a new up trunk."

více kontextu a obrázky v pdf zde: https://usaclean.com/pm/pdfview.aspx?documentid=14058