English to Dutch Tech/Engineering Metallurgy / Casting waterstraalsnijder

Make sure XXXXX is stable on the surface with the Hoops hanging over the sides.
Remove the Right-Side Access Panel.
If the Power Transformer is still taped to the Bottom Hoop underneath the Right-Side Access Panel, untwist the twist tie that holds the Transformer cable coiled at the back of XXXXX.
Then, remove the Power Transformer and set it and all wires aside.
Remove the Abrasive Hopper on the left side of XXXX.
Disconnect the electrical connections which should include two connectors for the abrasive vibration motors and abrasive pinch valve..