One disassembling the nose cap of the 2006 to 2011 Honda CRV reveals that the nose bearing is much larger diameter than the older Honda CRV. However the inner diameter of the bearing races exactly the same diameter. At 1st glance the older 1997-2005 Honda CRV differential nose bearing uses NACHI-5206 Bearing which carries a 62 mm outer diameter With a 30 mm inner diameter and a 5 mm bearing race with a total thickness of 23.7 mm.
https://automotiveknd.com/tag/torsen_lsd/

cccccccc

Using the Collet nut without the internal teeth, drive the new shaft into the new nose bearing. Taking the new gear end bearing & the drive gear you removed from the old shaft, drive them firmly onto the shaft.
https://www.ereplacementparts.com/ball-bearing-p-127224.html